StorageTek 9714, Hardware Operator'S Manual

Page: 29 / 76

95698 Eighth Edition 2-1
2
Controls and Indicators
This chapter shows the locations and describes the functions of the library
storage module (LSM) operator panel and the power switch. It also shows how
to set the SCSI address and the maximum usage count of the cleaning cartridge.
Refer to the drive publications for information about operating the drives.
■
Operator Panel
The LSM operator panel is on the front door of the LSM. The panel contains
softkeys and indicators, plus a two-line display. The display shows LSM status,
configuration, test sequences, and error information.
Figure 2-1 on page 2-2 shows
the panel and describes each item.
You use this panel to:
• Resolve machine problems.
If an error occurs, the display shows a fault symptom code (FSC) that you
can give to the customer services engineer (CSE) or to your local service
representative to help resolve problems. Write down the FSC as soon as it is
displayed.
• Receive instructions to close the door or cartridge access port (CAP).
• Set the SCSI address.
• Set the maximum usage count of the cleaning cartridge.