Ordering DLT Cartridge Labels
A-4
Eighth Edition
95698
Referring to
, insert the label into the recessed areas provided on
each cartridge.
1. Make sure that the cartridge has been at room temperature for at least 24
hours.
2. Clean the surface where the labels will be placed using a cleaning solution
made for this purpose. See
“Cleaning Cartridge Exterior” on page A-6
.
3. Locate the label you require:
•
DLTtape III has a “C” next to the far left number, bar code down.
•
DLTtape IIIXT has an “E” next to the far left number, bar code down.
•
DLTtape IV has a “D” next to the far left number, bar code down.
•
Diagnostic cartridge has a “DG” at the beginning of the VOLSER.
•
Cleaning cartridge has a “CLN” at the beginning of the VOLSER.
4. Hold the cartridge so that the write-protect switch is toward you.
5. Slide the label under the slots in the recessed area.
If you do not intend to ever replace this label with a different label, if you
wish, you can peel the backing from the label and carefully slide it under
the slots, pressing it into place.
Figure A-2. Applying the Cartridge Labels
C61004
VOLSER
LABEL
Summary of Contents for 9714
