STOK SGP2220, Operator'S Manual

Page: 18 / 80

18
ASSEMBLY
STEP 19: TESTING VALVES, hOSE, ANd REGU-
LATOR fOR LEAKS
See Figure 26.
Connections on the hose and regulator were tested at the
factory to ensure no gas leaks were present. However, ship-
ping and handling could loosen connections. As a safety
precaution:

Turn all control knobs on the control panel off.

Make sure the regulator is properly connected to the LP
gas cylinder.

To open the cylinder valve: turn handwheel counterclock-
wise.
If you hear a
rushing
sound, immediately turn off the
cylinder valve. This sound means there is a major leak at
the connection. Correct the problem before proceeding.

Using a clean paint brush and a 50/50 mixture of mild
soap and water, brush soapy solution over all the con-
nections and fittings on the grill.

“Growing” bubbles indicate a leak. Close the cylinder
valve then retighten all connections.
NOTE:
If leaks cannot be stopped, do not try to repair.
Call for replacement parts.

If you are not using the grill immediately after the leak test,
close the cylinder valve by turning the valve clockwise).
STEP 20: TESTING ThE LP GAS cyLINdER
See Figure 27.

Turn the control knobs on the control panel off, turn off
the LP gas cylinder valve, and disconnect the regulator
from the cylinder.

Remove the LP gas cylinder from inside the cabinet.

Using a clean paint brush and a 50/50 mixture of mild
soap and water, brush soapy solution over areas indicated
by arrows in figure 24.

“Growing” bubbles indicate a leak. Do not use or
move the gas cylinder. Contact a gas supplier or the fire
department!

If you see, smell, or hear the hiss of escaping gas from
the liquid propane cylinder:
• Move away from liquid propane cylinder
• Do not attempt to correct the problem yourself
• Call your local fire department
Fig. 26
REgulAToR
Fig. 27
lp gAS cylindER
wiTh “gRowing”
bubblES
hoSE