STOK SGP2220, Operator'S Manual

Page: 13 / 80

13
ASSEMBLY
cAREfULLy PLAcE ISLANd GRILL
IN fULL UPRIGhT POSITION TO
cOMPLETE ASSEMBLy.
STEP 9: SEcURING fIREBOX TO TOP TABLE
ANd fRAME.
See Figure 13.
Remove the following hardware from the blister pack:
AA - 1 Screw (M5 x 12 mm)

With grill in full upright position secure firebox to frame
to complete firebox and top table assembly.

Install screw (AA) through inside of firebox and into top
table.
Fig. 13
ScREw
(AA)
ScREw
holE
locATion
STEP 10: INSTALLING hEAT TENT
See Figure 14.

Set heat tent into firebox, placing tent inserts into bracket
in firebox.
Fig. 14
STEP 11: ASSEMBLING GUSSETS TO fRAME
See Figure 15.
Remove the following hardware from the blister pack:
AA - 8 Screws (M5 x 12 mm)

Position gussets as shown.

Insert screws (AA) through holes in gusset and into holes
in legs and leg brace. Tighten securely.
Fig. 15
guSSETS
lEg holES
lEg bRAcE
holES
ScREw
(AA)
hEAT
TEnT
TEnT
inSERT
bRAckET