STOK SGP2220, Operator'S Manual

Page: 10 / 80

10
ASSEMBLY
coRnER
bRAckET
SEcondARy TAblE
(Shown boTTom
SidE up)
lock
wAShER
(cc)
flAT
wAShER
(bb)
lEg
bRAckET
Fig. 7
Fig. 6
lock
wAShER
(cc)
flAT
wAShER
(bb)
ScREw
(AA)
STEP 3: ASSEMBLING LEfT LEG SEcTIONS
TO STORAGE ShELf
See Figure 7.
Remove the following hardware from the blister pack:
AA - 4 Screws (M5 x 12 mm)
BB - 4 Flat washers (M5)
cc - 4 Lock washers (M5)
 Insert each left leg section through the slots on the un-
derside of the storage shelf.

Align the holes in the left leg sections with the holes in
the leg brackets.

Slide a lock washer (cc) and flat washer (BB) onto each
screw (AA) and insert the screw through the holes in the
bracket and leg. Tighten securely.
 Repeat steps for other screw and leg.
STEP 2: ASSEMBLING STORAGE ShELf TO
RIGhT SIdE LEGS
See Figure 6.
Remove the following hardware from the blister pack:
AA - 4 Screws (M5 x 12 mm)
BB - 4 Flat washers (M5)
cc - 4 Lock washers (M5)

Turn the storage shelf upside down and slide over the right
side legs. Legs go through the corner brackets located
on underside of shelf.

Line up holes in leg with holes in corner bracket.

Slide a screw (AA) , lock washer (cc) , and flat washer (BB)
through corner bracket and into leg. Tighten securely.

Repeat steps for other screw and leg.
ScREw
(AA)
lEg
holES
lEfT SidE lEg
SEcTionS