9
ASSEMBLY
UNPACKING
This product requires assembly.
Carefully lift grill and components from the carton and
place the grill on a level work surface.
WARNING:
Do not use this product if any parts on the Loose Parts list
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
Inspect the grill carefully to make sure no breakage or
damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected the grill, identified all loose parts, and
satisfactorily operated the grill.
If any parts are damaged or missing, please call
1-800-847-5993 for assistance.
WARNING:
If any parts are damaged or missing, do not operate
this grill until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
CAUTION:
Some parts may contain sharp edges that may cause
personal injury. Wear protective gloves if necessary.
FIREBOX (UPSIDE DOWN)
REAR
LEG
FRONT
LEG
WASHER
SCREW
FIREBOX
HANDLE
Fig. 5
HOLES
STEP 1: ATTACHING LEGS, WIRE BASE, AND
WHEELS
See Figures 5 - 8.
Place the firebox top-down on a level work surface.
Remove the screws and washers from the top of the front
and rear legs.
Place the front leg in the socket closest to the firebox
handle. Place a rear leg in one of the remaining sockets.
WASHER
SCREW
