Stober MDS 5000, Commissioning Instructions

Page: 15 / 32

Connection
Commissioning Instructions I/O Terminal Module
15 ID 441758.05
WE KEEP THINGS MOVING
4
Terminal description X101 - SEA 5001, REA 5001, XEA 5001
Flexible with cable end, without plastic
sleeve 1,5
Flexible with cable end, with plastic
sleeve 0,5
2 leads with the same cross-section
with double cable end —
maximum conductor cross-section
Connection type maximum conductor cross-section
[mm
2
]
Pin Designation Function Data
9 GND 18 V Reference ground for pin 19 —
10 DGND Reference ground for pins 11 to
18 —
11 BE1
Binary input
High level: 12–30 V
Low level: 0–8 V
U
E max
= 30 V
T
A min
= 1 ms (with timestamp)
I
E max
= 16 mA at U
E max
12 BE2
13 BE3
a)
14 BE4
a)
15 BE5
a)
16 BA1
Binary output
I
A max
= 50 mA at 45 °C, 40 mA at 55 °C
T
A min
= 1 ms
17 BA2
18 24 V-In
24 V power:
•
For XEA 5001 and
• For binary outputs with SEA
5001 and REA 5001
Input area: 18–28.8 V
19 18 V-Out Auxiliary voltage 18 V
U
A
= 16–18 V
I
A max
= 50 mA
a) BE3, BE4 and BE5 can be used as encoder inputs. See chapter 4.2.3 BE encoder and BA encoder simulation. On the
REA 5001 these inputs can be converted to TTL level with sliding switches S0, S1 and S2.
9
10
11
12
13
14
15
16
17
18
19
maximum conductor cross-section
Connection type maximum conductor cross-section
[mm
2
]
rigid 1,5
flexible 1,5
Flexible with cable end, without plastic
sleeve 1,5
Flexible with cable end, with plastic
sleeve 0,5