Stober EZ Manual Download Page 51

Page: 51 / 460

3.5

Product description

3.5.1

Input options

MB motor a

EZ synchronous servo mo-

tor

EZ synchronous servo mo-

tor

Catalog ID 443311_en

Catalog ID 442437_en

The corresponding catalogs can be found at

http://www.stoeber.de/en/downloads/

Enter the ID of the catalog in the search field.

3.5.2

ServoStop motor adapter with brake (MB)

In this chapter, you will find the description and technical data of the motor adapter with brake.

3.5.2.1

Properties

•

Electrically actuated spring-loaded brake for dry running

•

Featuring backlash-free plug-in coupling (jaw coupling) for easy removal of the motor with the axis
braked in any position

•

Electrical release monitoring in the terminal box of the motor adapter

•

Manual monitoring of wear via air gap checks with a feeler gauge

•

Manual release (optional)

•

Radial shaft seal rings made of FKM with two sealing lips

•

Four oil drain holes to protect the brake from oiling up in case of leakage

•

Diverse-redundant system in accordance with EN ISO 13849-1

Fig. 1:

Motor adapter with ServoStop brake and directly attached EZ synchronous servo motor

3 PH planetary geared motors

3.5 Product description

Summary of Contents for EZ













































































































































































































































































































































































































































































Search results

Summary of Contents for EZ

Reviews:

Brands by name

Popular brands

Stober EZ, Manual

Search results

Summary of Contents for EZ

Reviews:

Brands by name

Popular brands