This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
(1) this device my not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause
undesired
operation.
Warning:
Changes or modifi cations made to this equipment not expressly approved by
STOBAG
may void the FCC
authorization to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in-
terference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
STOBAG SRCR 180 A USA / SRCR 200 A USA
Product description
SRCR 180 A USA
SRCR 200 A USA
14) Fuse 6,3 A T type
Description du produit
SRCR 180 A USA
SRCR 200 A USA
14) Fusible 6,3 A type „T“
Descripción del producto
SRCR 180 A USA
SRCR 200 A USA
14) Fusible 6,3 A tipo „T“
GB
F
E
IST207R01/CH01.4851 / STOBAG-Art.# 081029 - 2011-04
Zusatzblatt_SRCR_180-A_200-A_USA.indd 1
Zusatzblatt_SRCR_180-A_200-A_USA.indd 1
14.4.2011 16:28:13 Uhr
14.4.2011 16:28:13 Uhr