71
...
Man
4.5) Operation in “Manual with recorder” mode Man
1.
Press
key
■
repeatedly a number of times until
Auto
starts flashing.
2.
Press
key
▼
twice until
Man
starts flashing.
3.
Press
key
▼
to confirm the “manual” mode with recorder.
... Auto
From this moment you can use SRCW 06T as if it were in “manual” mode, except that all the commands transmitted using
key
▼
or
▼
, together with the day, hour and minute on which they were transmitted, will be memorized as events.
Note: the “manual with recorder” mode does not enable the recording of events containing the “
■
” command.
A tip for the inexperienced:
This operating mode is used to memorize events without having to program them one
by one. To record events that normally take place in the course of an entire week, access the “manual with recorder”
mode at the beginning of the week, then use SRCW 06T to command the daily up and down movement of the automa-
tions every day at the desired time. At the beginning of the following week, set SRCW 06T to the “automatic” mode;
at this point the events will be repeated automatically through all the following weeks.
To delete an event recorded by mistake, see chapter 5.2.3.
Table 17
Selecting another group
Example
1.
Press
key
▼
repeatedly in order to select the desired group.
2.
Now you can use keys
▼
■ ▼
to send commands to the selected group.
Table 18
Assembling a multiple group and sending a command
Example
1.
Starting from the 1st group, press key
▼
repeatedly in order to select another
group.
2.
Press
key
▼
to confirm the group.
...
3.
Repeat the two previous steps to select other groups.
4.
When the multiple group has been assembled, you can use the following keys
▼
■ ▼
to send the commands.
Note: if you select and confirm the wrong group, you can delete it by repeatedly pressing key
▼
until the group to be
eliminated starts flashing, then press key
▼
.
Table 19
Sending a special command to a group or multiple group
Example
1.
Starting from the 1st group, press key
▼
repeatedly in order to select another
group.
2.
Press
key
▼
to confirm the group.
...
...
or
3.
Repeat the two previous steps if you wish to select other groups.
5.
Press
key
▼
to confirm the special command.
6.
Now you can use the following keys
▼
■ ▼
to send the special command.
4.
Press
key
▼
repeatedly until the special command symbol “
” or “
”
starts
flashing.
Table 20
Abandoning the “manual” mode and returning to the selection menu:
Example
After sending a command, press key
▼
.
Or:
Make sure that no group has been selected then press one of the following
keys:
▼
■ ▼
(if necessary, select the groups by pressing key
▼
and deselect / select
them by pressing key
▼
).
Or:
Press
key
■
repeatedly a number of times until
Auto
starts flashing.
... Auto
Table 21
Selecting the “manual with recorder” mode
Example
www.stobag.com
GB
SKIMY_SRCW_06T.indd 71
SKIMY_SRCW_06T.indd 71
1.3.2010 11:07:35 Uhr
1.3.2010 11:07:35 Uhr
