Stobag MOVENO DSRCE-V, Installation And Use Instructions And Warnings

Page: 32 / 44

www.stobag.com
We hereby declare that this device conforms to the fundamental requirements and relevant provisions of the CE directives.
Declaration of conformity: www.stobag.com
32
7) Technical specifications of the MOVENO DSRCE-V tubular motors
Supply Voltage and Frequency : See the technical data on the label attached to each model
Current and power : See the technical data on the label attached to each model
Torque and speed : See the technical data on the label attached to each model
Motor diameter: : MOVENO-U = Ø35mm;
Precision (Resolution) of the electronic limit switch : greater than 0.55° (depending on the MOVENO version)
Precision of the stop positions : Class 2 (±5%)
Mechanical resistance : in accordance with EN 14202
Continual operating time
: Maximum 4 minutes
Protection class : IP 44
Working temperature : -20÷55 °C
Length of connection cable : 0,5 / 1,5 m
Signal voltage
: Approx. 24Vdc
Length of signal cables : max. 30m if near other cables, otherwise 100m
Radio receiver frequency
: 433.92 MHz
Radio receiver coding : 52 Bit rolling code
No. of transmitters that can be memorized : 14, including a maximum of 3 SKIROSOL climatic sensors
Range of SKIMY transmitters : Estimated 150 m in the open and 20 m inside buildings *
* The capacity of the transmitters is strongly influenced by other devices with continuous transmissions which operate at the same frequency.
These include alarms, headphones, etc… which interfere with the receiver.
Subject to change without prior notification.
MOVENO_DSRCE-V.indd 32 MOVENO_DSRCE-V.indd 32 9.2.2010 14:33:53 Uhr 9.2.2010 14:33:53 Uhr