24
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-SGC60 PRODUCT CODE: 700793 04/2020
Instructions
Before first use
• When your new gas cooktop has been professionally installed, please
take the time to read this manual thoroughly to familiarise yourself with the
appliance. Pay particular attention to the safety instructions on pages 5–8.
• Clean the cooktop surface as described in the “Care and cleaning”section.
• Check and ensure the cooktop is securely plugged into an appropriate
wall outlet and power is switched on to the outlet.
The cooktop
• The control panel at the side of the cooktop
has four control knobs, one for each burner; the
small diagram to the right of each knob (Fig. 14)
illustrates which burner it controls.
• The following symbols will appear on the control
panel, next to each control knob:
Black circle:
Gas off
Large flame:
HIGH (maximum) setting
Small flame:
LOW (minimum) setting
• The minimum setting is at the end of the
anticlockwise rotation of the control knob.
• All operation positions must be selected between
the maximum and minimum position. Never set a
knob to between the maximum and off position.
Lighting and extinguishing a burner
• To light a burner, press down the control knob gently
and turn it anticlockwise to the HIGH
position. When
the burner lights, keep the knob depressed for
approximately 15 seconds to ensure it stays lit.
• Turn the knob to the required position, anywhere
between HIGH and LOW. Do NOT set it between OFF and HIGH.
• After use, always turn the control knob fully clockwise to the gas off position.
NOTE:
• If the burner has not lit after 15 seconds—or in the event of a burner flame
being accidentally extinguished—turn off the burner control and wait for at
least one minute before reigniting it.
• You can use matches to light a burner in the event of a power failure.
Fig. 14
