15
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-SGC60 PRODUCT CODE: 700793 04/2020
Installation (Cont.)
Applying the seal
The installation hardware includes a length of sealing tape, which when
applied around the cooktop prevents liquid from entering the cabinet. Before
installing the cooktop, please apply this sealing tape follow the instructions
below.
• Remove the trivets (pan supports) and put aside.
• Remove the burner caps and flame
spreaders (Fig. 4), then turn the
cooktop upside down and place it
on a cushioned mat, taking care not
to damage the ignition plugs and the
thermocouples.
• The supplied sealing tape is 3mm thick and 10mm wide. Detach the
backing strip from the tape but ensure that the transparent adhesive still
adheres to the seal itself.
• Correctly position the
sealing tape under the
edge (Fig. 5), ensuring
that the outer part of the
seal perfectly matches the
outer edge of the cooktop.
The ends of the strips
must fit together without
overlapping. Then press the seal firmly in place at the underside of the
cooktop.
•
IMPORTANT:
Do not use a silicon sealant to seal the appliance against
the aperture. This will make it difficult to remove the cooktop from the
aperture in future if it needs to be serviced.
Burner cap
Flame spreader
Fig. 4
Fig. 5
