manualshive.com logo in svg

Stirling STR-SGC60, Instruction Manual, Page: 33 / 36

Share
Download
Stirling STR-SGC60 Instruction Manual Download Page 33

33

AFTER SALES SUPPORT

1300 886 649

[email protected]

AUS

MODEL: STR-SGC60   PRODUCT CODE:  700793   04/2020

Technical specifications

Rated Input Voltage

220–240V ~   50-60Hz   0.6W

Certified Gas Type

NG + ULPG

Cooktop Material

Stainless Steel

Flame Failure Device

Yes (x4)

Cooktop dimensions

590 (W) x 500 (D) x 95 (H) mm

Benchtop cut-out 
dimensions

553 (W) x 473 (D) mm

Weight (approx.)

7kg

Other Useful Information (Cont.)

Compliance

This appliance has been fully tested and meets all requirements as set out by 
standards AS/NZS 60335.1 and AS 60335.2.102 for electrical safety and  
AS/NZS 5263.1.1 for gas safety.

The RCM Mark (Regulatory Compliance Mark) indicates that the product 

complies with the relevant guidelines of the ACMA as well as corresponding 

government requirements for the safety of electrical devices.

E209

Table 1

Regulated for 

NATURAL GAS

ULPG

Injection 

∅

 (mm)

MJ/h

Gas 

Pressure

Injection 

∅

 (mm)

MJ/h

Gas 

Pressure

Rapid

1.50

10.8

 

1.0 kPa

0.88

10.8

2.75 kPa

Semirapid

1.12

6.3

0.68

6.3

Auxiliary

0.90

4.0

0.56

4.0

Total

27.4

27.4

GMK10225

Summary of Contents for STR-SGC60





































Reviews:

No comments