background image

Installation, Service and User Instructions  

(French version page 10)  

                                  
 

 

                    

                    

 

DIMENSIONS: 35 

13/16

’’ 

(910 mm)

(W) x 21 

11/16

’’ 

(550 mm) 

Models P310..L4X(2 

OR

 5)D   

 

IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR’S USE. 
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. 
OBSERVE ALL GOVERNING CODES AND ORDINANCES. 

WARNING: If the information in this manual is not followed exactly, a fire or 
explosion may result causing property damage, personal injury or death. 
Do not store or use gasoline or other flammable vapors and liquid in the vicinity of 
this or any other appliance. 
WHAT TO DO IF YOU SMELL GAS 
     - Do not try  to light any appliance. 
     - Do not touch any electrical switch. 
     - Do not use any phone in your building. 
     - Immediately call your gas supplier from a neighbor’s phone. Follow   
       the gas supplier’s instructions. 
     - If you cannot reach your gas suppliers, call the fire department. 
Installation and service must be performed by a qualified installer, service agency 
or the gas supplier. 

Read this instruction booklet before installing and using the appliance. 

The manufacturer will not be responsible for any damage to property or to persons caused by 
incorrect installation or improper use of the appliance. 

The manufacturer reserves the right to make changes to its products when considered necessary and useful, 
without affecting the essential safety and operating characteristics. 

This appliance has been designed for non-professional, domestic use only. 

 

Built-in gas hotplates     

BERTAZZONI  

Summary of Contents for P310..L4X(2 OR 5)D

























Reviews: