Installation, Service and User Instructions
(French version page 11)
DIMENSIONS: 23 13/16’’ (605 mm)(W) x 20 1/2’’ (520 mm)(D)
Models PNM0..D7X (2 or 5)D
P M B 2 4 3 0 0 X
Type
‘A’
Models PN40..D7X(2 or 5)D
P M 2 4 4 0 0 X
Type
‘B’
IMPORTANT SAFETY INFORMATION
PLEASE READ AND FOLLOW THESE IMPORTANT INSTRUCTIONS FOR THE SAFETY OF YOUR HOME AND OF
THE PEOPLE LIVING IN IT.
Save this Manual for local electrical inspector’s use.
Read and save these instructions for future reference.
Observe all governing codes, ordinances and regulations.
-Do not store or use gasoline or other flammable substances in the vicinity of this or any other appliance.
- WHAT TO DO IF YOU SMELL GAS
Do not light any appliance.
Do not touch any electrical switch.
Do not use any phone in your building.
Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.
If you cannot reach your gas suppliers, call the fire department.
-Installation and service must be performed by a qualified installer, service agency or the gas supplier.
In Massachusetts: All gas products must be installed by a "Massachusetts" licensed plumber or gasfitter. A
"T" handle type manual gas valve must be installed in the gas line connected to this appliance.
WARNING:
This
appliance
shall
not
be
installed
with
a
ventilation
system
that
blow
air
downward
toward
the
range/rangetop/cooktop;
this
type
of
ventilation
system
may
cause
ignition
and
combustion
problem
with
the
gas
appliance
resulting
in
a
personal
injury
or
unintended
operation
WARNING:
An
air
curtain
or
other
overhead
range/rangetop/cooktop
hood,
which
operates
by
blowing
a
downward
airflow
onto
a
range/rangetop/cooktop,
shall
not
be
used/installed
in
conjunction
with
this
gas
range/rangetop/cooktop.
Installation must conform with local codes or in the absence of codes, the National Fuel Gas Code ANSI
Z223.1 / NFPA 54. Electrical installation must be in accordance with the National Electrical Code,
ANSI/NFPA70 – latest edition and/or local codes. IN CANADA: Installation must be in accordance with the
current CAN/CGA-B149.1 National Gas Installation Code or CAN/CGA-B 149.2, Propane Installation Code
and/or local codes. Electrical installation must be in accordance with the current CSA C22.1 Canadian
Electrical Codes Parts 1 and/or local codes.
Installation of any gas-fired equipment should be made by a licensed plumber. A manual gas shut-off valve
must be installed in the gas supply line ahead of the oven in the gas flow for safety and ease of service.
WARNING!
If the information in this manual is not followed exactly, a fire or explosion may result
causing property damage, personal injury or death.
Summary of Contents for PM24400X
Page 22: ...22 Fig 1 Fig 2 Fig 3 Fig 4A Fig 4B ...
Page 23: ...23 Fig 5 Fig 6 Fig 7 Fig 8 ...
