Still RX70-20/600, Original Instructions Manual, Page: 401 / 432

Checking the lift cylinders and con-
nections for leaks
WARNING
Risk of injury
Observe safety regulations for working on the lift
mast, see the "Working at the front of the truck"
chapter.
–
Check hydraulic connections and lift cylin-
ders for leaks (visual inspection).
–
Have leaking screw joints or leaking hy-
draulic cylinders repaired by the authorised
service centre.
Checking the fork arms
CAUTION
Fork arms must not be uneven!
–
Always replace both fork arms.
–
Check the fork arms (1) for visible deforma-
tion and excessive wear.
No cracks or deformations must be visible on
the fork arms in the area around the fork bend.
Wear must not amount to more than 10% of
the original thickness.
–
Check that the locking screws (2) are
present and securely attached.
–
Replace any worn or deformed fork arms.
Check the condition and correct operation of
the fork latch:
–
Move the locking lever (3) into a vertical po-
sition.
It must be possible to move the fork arm.
–
Move the locking lever into a horizontal po-
sition.
The latch must engage in a recess on the fork
carriage. It must not be possible to move the
fork arm.
7094_810-004

1
2
2
3
d3911398

Maintenance
5
1000-hour maintenance/yearly maintenance
387 57368011501 EN - 10/2020 - 04