manualshive.com logo in svg

Still RX70-20/600, Original Instructions Manual, Page: 258 / 432

Share
Download
Still RX70-20/600 Original Instructions Manual Download Page 258

Example using the pictograms for configura-

tion (1):
If the operating lever (1) is moved in the direc-

tion of the arrow (E), the sideshift moves to

the left.
If the function key for the "5th function" (2) is

actuated and the operating lever (1) is moved

in the direction of the arrow (E), the fork arms

open.

Picto-

gram Attachment function

Auxiliary hydraulics "5th function"
Move the sideshift to the left
Move sideshift to the right
Adjust fork arms: open
Adjust fork arms: close
Rotate to the left
Rotate to the right

 NOTE

The pictograms are affixed according to the

attachment fitted at the factory. If an attach-

ment with different functions is fitted, the au-

thorised service centre must check that the

pictograms bear the correct representation

and must change them if necessary.

Operation

4

Attachments

 244

57368011501 EN - 10/2020 - 04

Summary of Contents for RX70-20/600

















































































































































































































































































































































































































































Reviews:

No comments