Still RX70-20/600, Original Instructions Manual, Page: 353 / 432

LPG cylinders, even when empty, must not be
stored in workshops.
Safety devices
After maintenance and repair work, all safety
devices must be reinstalled and tested for op-
erational reliability.
Set values
The device-dependent set values must be ob-
served when making repairs and when chang-
ing hydraulic and electrical components.
These are listed in the appropriate sections.
Lifting and jacking up
DANGER
There is a risk to life if the truck tips over!
If not raised and jacked up properly, the truck may tip
over and fall off. Only the hoists specified in the
workshop manual for this truck are allowed and are
tested for the necessary safety and load capacity.
–
Only have the truck raised and jacked up by the
authorised service centre.
–
Only jack the truck up at the points specified in the
workshop manual.
The truck must be raised and jacked up for
various types of maintenance work. The au-
thorised service centre must be informed that
this is to take place. Safe handling of the truck
and the corresponding hoists is described in
the truck's workshop manual.
Working at the front of the truck
DANGER
Risk of accident!
If the lift mast or fork carriage is raised, no work may
be performed on the lift mast or at the front of the
truck unless the following safety measures are ob-
served.
–
When securing, only use chains with sufficient
load-bearing capacity.
–
Contact the authorised service centre.
Maintenance
5
Safety regulations for maintenance
339 57368011501 EN - 10/2020 - 04