Still RX70-20/600, Original Instructions Manual, Page: 337 / 432

DANGER
If the towing vehicle brakes, there is a risk that the
truck will drive into the towing vehicle!
If a rigid connection has not been used for power
transmission in two directions during towing, the
truck may drive into the towing vehicle when the tow-
ing vehicle brakes. Use a tested tow bar for safety
reasons.
–
Use a tested tow bar.
CAUTION
If the truck drive between the drive motor and the
drive axle is not interrupted, the drive may be dam-
aged.
–
Place the drive direction switch in the neutral posi-
tion.
DANGER
While manoeuvring, there is a risk of fatal injury in
the area between the truck and the towing vehicle!
Inform the driver of the towing vehicle and the me-
chanic attaching the tow bar about the risks. When
you fit the tow bar, always use a second person to
guide the towing vehicle manoeuvres.
–
Manoeuvre with a second person as a guide.
CAUTION
Steering is stiff! There is no power steering if the hy-
draulics fail!
–
Select a slow towing speed to ensure that the
truck and the towing vehicle can be braked and
controlled effectively at all times.
CAUTION
If the truck is not steered while it is being towed, the
truck may veer out in an uncontrolled manner!
–
The truck being towed must also be steered by a
driver.
–
The driver of the truck being towed must sit in the
driver's seat and fasten the seat belt before tow-
ing.
–
Where possible, activate the restraint systems
provided.
–
Set down the load and lower the fork arms
so that they are close to the ground.
Operation
4
Procedure in emergencies
323 57368011501 EN - 10/2020 - 04