Still RX20 14-20, Original Instructions Manual

Page: 493 / 600

NOTE
Battery replacement using a hand pallet truck
is allowed only if using the change frame per-
mitted for this purpose.
–
For permitted combinations, observe and
comply with the following table.
Tray Battery type Battery change frame
315 Lead-acid battery, circuit B
56364206701
364 Lead-acid battery, circuit A
500 Lithium-ion battery, 13.1 kWh (BG 2.1)
501 Lithium-ion battery, 49.0 kWh (BG 2.2)
365
Lead-acid battery, circuit A
56364206708
366
510
Lithium-ion battery, 16.3 kWh (BG 8.1)
Lithium-ion battery, 16.3 kWh (BG 8.2)
511
Lithium-ion battery, 16.3 kWh (BG 9.1)
Lithium-ion battery, 49.0 kWh (BG 9.2)
Removing the battery
–
Park the truck securely.
–
Open the battery door.
CAUTION
Potential for damage to the battery male connector!
If the battery male connector is disconnected while
the key switch is on (under load), an arc will be
produced. This can lead to erosion at the contacts,
which considerably shortens the service life of the
contacts.
–
Switch off the key switch before disconnecting the
battery male connector.
–
Do not disconnect the battery male connector
while the key switch is switched on, except in an
emergency.
Operating
4
Replacing and transporting the battery
477 56368011501 EN - 04/2022 - 13