Still RX20 14-20, Original Instructions Manual

Page: 198 / 600

DANGER
Risk of fatal injury from being run over if the truck
rolls away!
Park the truck securely if the parking brake is faulty.
Secure the industrial truck to prevent it from rolling
away.
–
To do this, strictly adhere to the following instruc-
tions:
–
If the parking brake cannot be applied auto-
matically or via the push button, perform an
emergency actuation of the parking brake.
See the section entitled "Emergency actua-
tion of the electric parking brake (variant)" in
the chapter entitled "Behaviour in emergen-
cies".
–
If the parking brake cannot be applied via
the emergency actuation mechanism, se-
cure the truck with wedges to prevent it
from rolling away.
–
Have the parking brake repaired by an au-
thorised service centre.
Message:
Parking brake cannot be applied
If the truck control unit detects a malfunction in
the parking brake, the truck cannot be switch-
ed off.
●
The
Parking brake cannot be
applied
message appears on the dis-
play-operating unit.
●
The LED (2) on the push button (1) flashes.
●
A warning signal sounds.
NOTE
If it is necessary to switch off a truck with
a faulty parking brake, the section entitled
"Switching off the truck when the electric park-
ing brake is faulty" must be observed. It is
essential to secure the truck to prevent it from
rolling away.
6219_003-006_V2

Operating
4
Driving
182 56368011501 EN - 04/2022 - 13