Still RX20 14-20, Original Instructions Manual

Page: 20 / 600

of damping pressure peaks in the hydraulic
system.
Drive
The STILL RX20 14-20 is driven via both
front wheels by maintenance-free three-phase
drives in the front axle with 48-volt technology.
Lead-acid batteries and lithium-ion batteries
that can be replaced from the side are availa-
ble as a power supply source. In both cases,
the trucks can be supplied as a cold store var-
iant. When using C-Line lithium-ion batteries,
the cold store variant is not available. In this
scenario, X-Line lithium-ion batteries are the
first choice.
The STILL RX20 14-20 can feature an on-
board charger as a variant to enable charging
at any CEE-16-A socket.
The driver can help to influence the energy
consumption and performance of the truck us-
ing the "Blue-Q" efficiency mode. The required
setting for the current application can be se-
lected via the display-operating unit.
Steering
The kickback-free, hydraulic rear-wheel steer-
ing with "Curve Speed Control" (CSC) ensures
driving stability when cornering, allowing the
truck to achieve a small turning circle and ne-
gotiate narrow aisle widths.
Operating
The multi-lever, the Fingertip mini-lever and
the Joystick 4Plus are available as operating
devices for the hydraulic functions. These op-
erating devices enable precise operation and
smooth control of the lifting speed thanks
to directly controlled valves and proportional
valve technology.
The acceleration behaviour and braking be-
haviour can be selected individually using dif-
ferent drive programmes.
For drive mode, the truck features either sin-
gle-pedal or dual-pedal operation. The truck
is accelerated and braked (regenerative brak-
ing) via the accelerator pedal or dual-pedal
Foreword
1
Your truck
4 56368011501 EN - 04/2022 - 13