Still RX20 14-20, Original Instructions Manual

Page: 463 / 600

The battery door can be locked in the open
position using a support bracket.
–
Pull the support bracket (1) up and out of its
support eyelet (2) on the battery door.
–
Swing the support bracket (1) outwards in
an anticlockwise direction.
–
Press down on the support bracket (1) to
clip it into the support eyelet (3) on the
truck.
The battery door will lock into a slightly open
position.
After charging
CAUTION
Risk of danger to components!
–
Switch off the battery charger before the charging
cable is disconnected.
–
Switch off the battery charger.
–
Swing the support bracket (1) back into po-
sition and lock it into the support eyelet (2)
on the battery door.
–
Open the battery door and lock it into the
open position.
–
Disconnect the battery male connector from
the plug for the battery charger.
–
Connect the battery male connector to the
truck.
DANGER
Risk of explosion!
Only disconnect the connection assem-
blies when the truck and battery charger
are switched off.
CAUTION
There is a risk of short circuit if cables
are damaged.
Do not crush the battery cable when
closing the battery door.
–
Ensure that the battery cable does
not come into contact with the battery
door.
1
3
2
1

Operating
4
Handling the lead-acid battery
447 56368011501 EN - 04/2022 - 13