Still RX20 14-20, Original Instructions Manual

Page: 377 / 600

Camera on the right-hand fork arm Image always active
Camera on the right-hand fork arm + rear view
camera on the overhead guard
"Neutral" and "forwards" drive direction: image
from the fork arms camera
"Backwards" drive direction: image from the
rear view camera
The default setting of the monitor images can
be changed by the authorised service centre
on request, e.g.:
●
Image from the rear view camera for the
"neutral" and "forwards" drive direction and
image from the front view camera for the
"backwards" drive direction
●
If you select the "backwards" drive direc-
tion, the front image remains active for an-
other 20 to 30 seconds before the display
changes to the rear image. The same be-
haviour applies in reverse if you change
the drive direction from "backwards" to "for-
wards".
–
To change the default settings of the moni-
tor images, contact the authorised service
centre.
Information about the cameras
Rear view camera
●
The camera angle is chosen in such a
way that the counterweight is always visible
and thus the immediate surroundings of the
truck. STILL recommends not changing this
setting.
●
The image is displayed the correct way
round, just like the interior mirror on a car.
Objects at the rear right of the truck are
displayed on the right-hand side of the mon-
itor.
Front view camera on the lift mast
●
The camera angle is chosen so that the
fork tips are always visible. When transport-
ing tall loads, you can set the camera at a
steeper angle so that you can see over the
load. Caution: The truck contour for better
orientation is no longer visible, people in the
immediate vicinity are no longer displayed
etc.
Operating
4
Optical assistance systems
361 56368011501 EN - 04/2022 - 13