Still LiftRunner B frames, Original Instructions Manual

Page: 67 / 108

Operation
5
Assembling the articulated steering system
Preparation
The following section describes the procedure
for a tugger train with two frames when loading
and unloading is performed on the left-hand
side in the drive direction.
The socket pins and the alignment bolts are
pre-assembled when delivered.
The rigid tiller must be fitted between the first
frame and the second frame (see figure).
(Arrow in drive direction).
Assembling the rigid tiller
WARNING
Risk of injury through crushing!
– The frames are heavy. Never place hands or
feet underneath the raised frames.
– When raising the frame, always use appropriate
devices (wedges, wooden blocks) to prevent
rolling or tipping.
– Use only approved hardwood blocks.
– Use appropriate means (wooden blocks)
to place the frames and the rigid tiller in a
horizontal position.
50988046101 EN - 02/2017 61