Still LiftRunner B frames, Original Instructions Manual

Page: 19 / 108

Introduction
2
Residual risk
available to the driver. These operating
instructions for the frames do not form the
operating procedures. A responsible person
must be appointed.
The structure and equipment of the frames
correspond to the Machinery Directive
2006/42/EC and are therefore identified with
the CE mark. The operating company must,
however, select the frame type and frame
equipment so as to comply with the local pro-
visions for deployment.
The result must be documented (§ 6 Arb-
SchG). When deployment of the frames in-
volves similar hazard situations, the results
may be summarised. This summary is de-
signed to help to meet the requirements of
this regulation. The summary specifies the
primary hazards that, in the event of non-com-
pliance, are the most frequent causes of acci-
dents. If other major hazards are present as
a result of the specific operating conditions,
these hazards must also be taken into consid-
eration.
The conditions of use for the frames are
broadly similar in many plants, so the haz-
ards can be summarised in one overview. The
information provided on this subject by the
relevant employers' liability insurance associ-
ation or national authorities must be observed.
50988046101 EN - 02/2017 13