39
MS 360 C
english / USA
:
Pull the starter grip slowly with your
right hand until you feel it engage –
and then give it a brisk strong pull
and push down the front handle at
the same time.
:
Do not pull out the starter rope all
the way - it might otherwise break.
:
Do not let the starter grip snap back
– guide it slowly and vertically into
the housing so that the starter rope
can rewind properly.
If engine is new, pull starter grip several
times to prime the fuel line.
When engine begins to fire:
:
Press in decompression valve.
:
Move Master Control lever
(4)
to
n
and continue cranking –
as soon
as engine runs, immediately
blip
the throttle trigger
(5)
–
the Master Control lever
(4)
will
move to the “Run” position
#
(6)
and the engine will settle down to
idling speed.
.
As the chain brake is still engaged,
the engine must be returned to
idling speed
immediately
– or the
engine and chain brake might
otherwise be damaged.
:
Press down the interlock lever.
:
Immediately pull the hand guard
back toward the front handle:
=
The chain brake is now disengaged
– your saw is ready for operation.
Always disengage chain brake
before accelerating engine. High
revs with the chain brake engaged
(chain locked) will quickly damage
the powerhead and chain drive
(clutch, chain brake).
143BA020 KN
6
4
5
145BA008 KN
0
STOP
143BA012 KN
Summary of Contents for MS 360 C
Page 64: ...63 MS 360 C english USA...
Page 65: ...64 english USA MS 360 C...
Page 129: ...128 espa ol EE UU MS 360 C...
