40
english / USA
MS 360 C
:
Observe safety precautions.
:
Always check operation of chain
lubrication before starting work.
At very low outside temperatures:
:
Allow engine to warm up at part
throttle.
:
Change over to winter operation
if necessary – see “Winter
Operation”.
To shut down the engine:
:
Move Master Control lever to
$
.
If fuel tank has been run until dry
and then refueled:
:
Press in button to open the
decompression valve.
:
Pull starter rope several times until
fuel system is primed.
:
Now start the engine.
If the engine doesn’t start:
If you did not move the Master Control
lever to "Warm Start"
n
quickly enough
after the engine began to fire, the
combustion chamber has flooded.
:
Set Master Control lever
(1)
to
l
.
:
Turn the twist lock
(2)
above the rear
handle 90° counterclockwise.
:
Lift off the carburetor box cover
(3)
vertically.
:
Clean away loose dirt from around
the filter.
:
Pull off the spark plug boot.
:
Take out the screw and remove the
shroud.
:
Unscrew and dry off the spark plug.
:
Set the Master Control lever to
d
:
Crank the engine several times with
the starter to clear the combustion
chamber.
:
Refit the spark plug. Connect the
spark plug boot (press it down
firmly).
:
Set Master Control lever to
n
–
even if engine is cold.
:
Press in button to open the
decompression valve.
:
Now start the engine.
Fuel tank run dry and then
refueled:
:
Press in button to open the
decompression valve.
:
Pull the starter several times to
prime the fuel system.
1
2
3
138BA001K
Summary of Contents for MS 360 C
Page 64: ...63 MS 360 C english USA...
Page 65: ...64 english USA MS 360 C...
Page 129: ...128 espa ol EE UU MS 360 C...
