38
MS 271 C, MS 291 C
:
Use a drift (2) to drive out the
screw (1).
Installing
:
Use a drift (2) to drive home the
screw (1).
– Reassemble all other parts in the
reverse sequence.
6.5
Cylinder / Crankshaft
The engine pan is screwed to the
engine housing.
All sealing faces must be in perfect
condition. If the sealing faces are
damaged, replace the part
– Remove the shroud,
b
6.4
– Pull off the boot and unscrew the
spark plug,
b
4
2710RA093 TG
1
2
2710RA094 TG
2
1
– Remove the fan housing,
b
8.2
– Remove the flywheel,
b
7.6
– Remove the clutch,
b
4
– Remove the oil pump,
b
11.3
– Remove the filter base,
b
12.3
– Remove the carburetor,
b
12.5
– Remove the carburetor carrier,
– Remove the air guide shroud,
b
12.4
– Remove the muffler,
b
6.1
– Remove the handlebar,
b
9.3
– Remove the tank housing,
b
12.11.5
:
Remove the screws (1) from the
underside of the machine.
2710RA095 TG
1
1
1
1
:
Carefully release the cylinder (1)
from the engine pan and lift it
away.
:
Loosen the crankshaft (1) at the
bearing seats in the engine
pan (2) and take it out of the
engine housing.
:
Remove the retaining ring (1).
2710RA096 TG
1
2710RA097 TG
1
2
2710RA098 TG
1
