84
MS 271 C, MS 291 C
:
Push the fuel return hose (1) into
the guides (arrows).
:
Position the fuel return hose (1)
so that it is beside the short circuit
wire's grommet (2).
Do not kink or pinch the fuel return
hose.
– Install the ignition lead,
b
7.3
– Reassemble all other parts in the
reverse sequence.
12.5
Carburetor
– Remove the filter base,
b
12.3
– Open the fuel tank cap and drain
the fuel tank.
– Collect the fuel in a clean
container,
b
1
Disconnect the fuel hose only when
the tank cap is open.
2710RA269 TG
1
2
:
Push the fuel hose (1) back a
little
– the fuel hose is disconnected.
Models with manual fuel pump
:
Remove the fuel hose (1).
All models
:
Remove the carburetor (1).
– Check the carburetor and service
or replace if necessary.
5902RA363 TG
1
2710RA270 TG
1
2710RA271 TG
1
Models with manual fuel pump
– Install a new fuel hose,
b
12.11.3
Installing
Make sure the washer (1) is in
place.
Make sure the ring (1) is in place.
Make sure sealing ring (2) is in
place.
– Check the components and
replace as necessary.
:
Push the carburetor (1) onto the
studs (arrows).
5902RA097 TG
1
5902RA371 TG
2
1
2710RA272 TG
1
