background image

© 2015 by Snow Joe

®

, LLC

All rights reserved. Original instructions.

A Division of Snow Joe

®

, LLC

Model SWJ699E

Form No. SJ-SWJ699E-880E-M

OPERATOR’S MANUAL

SAVE THESE INSTRUCTIONS

14-INCH 9-AMP ELECTRIC  

CHAIN SAW

IMPORTANT!

Safety Instructions
All Operators Must Read These 

Instructions Before Use

Read all the instructions contained in this manual. Keep this 

manual in a safe place, so that the information is available at 

all times. If you give the equipment to another person, make 

sure to provide these operating instructions. Basic safety 

precautions should always be followed to reduce the risk of 

fire, electric shock, and personal injury. 

Notice the personal safety alert symbol 

m

 used in this 

manual to draw your attention to a WARNING given along 

with the particular operating instruction. This means that 

the operation requires special ATTENTION, CAUTION, and 

AWARENESS.

Intended Use

This electric chain saw was designed and manufactured for 

trimming and pruning tree limbs and branches and for cutting 

smaller logs up to 10 in. (25 cm) thick. All of the wooden 

objects intended to be cut with this chain saw should be no 

thicker than the guide bar's maximum cutting capabilities.

Improper Use

Any other use differing from the above mentioned applications 

poses a serious hazard to the user and may damage both the 

tool and your personal property. Examples of improper use 

include, but are not limited to:

•  trimming hedges;
•  carving;
•  sectioning pallets, crates, and various packing materials;
•  sectioning furniture or other materials with nails, screws, or 

other metal components;

•  butchering meat;
•  using the machine to lift, move, or split objects;
•  using the machine while fastened to fixed supports.

Improper use of the machine will invalidate the warranty, 

relieve the manufacturer from all liabilities. The user will 

consequently be liable for all and any damage or injury to 

himself/herself or others.

General Safety 

m

WARNING!

 

When using electric yard tools, basic safety 

precautions should always be followed to reduce the risk of 

fire, electric shock, and personal injury, including the following:

1. Keep guards in place – Protective guards should be 

checked periodically to ensure they are properly fitted and 

in correct working order.

2. Remove adjusting keys and wrenches – Check that 

adjusting wrenches are removed from the saw before 

turning it on.

3. Keep work area clean and well-lit – Clear work area of 

branches and limbs after each cutting session. Cluttered 

areas invite accidents.

4.  Avoid dangerous conditions – Do not use this machine 

in rainy, stormy, damp, or wet locations. Do not operate 

the unit in gaseous or explosive atmospheres. Motors 

in these units normally spark, and the sparks may ignite 

fumes.

5.  Do not use the chain saw in the rain.
6.  Keep bystanders and children away – 
All bystanders, 

including children and pets, should be kept a safe 

distance away from the work area.

7.  Do not force the tool – 

It will do the job effectively and 

safely if it is used at the rate for which it was designed. 

8.  Use the right tool – Do not force the tool or any 

attachment on the tool to do a job for which it was not 

intended. 

9. Wear proper apparel – Do not wear loose articles of 

clothing or jewelry since such items may get caught 

in moving parts. Wearing heavy-duty rubber gloves, 

substantial non-skid footwear, and close-fitting clothing is 

recommended when working outdoors with power tools.

10. Wear protective hair coverings to contain long hair. 
11. Always wear safety glasses and ear defenders to 

provide eye and ear protection – Everyday eyeglasses 

only have impact resistant lenses and do not provide the 

same protection as safety glasses.

12. Wear face or dust masks – If the cutting operation is 

dusty, the use of a face or dust mask specially designed 

to filter out microscopic particles is recommended.

13. Do not overreach – Keep proper footing and balance  

at all times.

14. Maintain tools with care – Keep tools sharp and clean 

for the best and safest performance. Follow instructions 

for lubricating and changing accessories. 

1

Summary of Contents for SUNJOE SWJ699E

























Reviews: