![background image](http://html1.mh-extra.com/html/stihl/ghe-420/ghe-420_instruction-manual_1379020065.webp)
63
DE
FR
NL
IT
ES
PT
NO
SV
FI
DA
PL
SL
EN
0478 201 9916 A - EN
Fault:
Motor does not start
Possible cause:
– Motor overload protection activated
– No mains voltage
– Electric cable, plug, plug connector or
switch defective
– Fuse in UK plug damaged (only applies
to machines for UK)
– Feed chute ATO 400 not properly
closed – safety cut-off switch actuated
(safety interlock)
– Blade disc blocked
Remedy:
– Allow machine to cool down (
– Check power cable and fuse
– Check cable, plugs, connector and
switch and replace if necessary (by
electrician)
– Replace fuse
– Close feed chute ATO 400 properly and
fasten (tighten On- / Off switch) (
– Remove feed chute and remove
shredder deposits from the housing
(Important: disconnect the power cable)
(
Fault:
Reduced shredding performance
Possible cause:
– Blunt blades
– Incorrectly ground blades
– Power cable too long
– Bent blade disc
– GHE 450: Incorrect rotational direction
of blade disc
Remedy:
– Reverse or sharpen blades
– Sharpen blades correctly
– Check blade disc visually
– GHE 450: Change rotational direction
Fault:
Shredding material is not drawn in
Possible cause:
– GHE 450: Incorrect rotational direction
of blade disc
– Blunt or incorrectly ground blades
– Gap between the two blades (hard
material blade disc)
– Blade cover not removed
Remedy:
– GHE 450: Change rotational direction
– Regrind blade and ensure sharpening
angle is exactly correct
– Install blades onto the hard material
1
9.
1
Handover confirmation
1
9.2 Service confirmation
Please hand this instruction manual
to your STIHL specialist dealer in
the case of maintenance operations.
He will confirm the service operations
performed in the pre-printed boxes.
1
8. Troubleshooting
If necessary, contact a specialist
dealer; STIHL recommends STIHL
specialist dealers.
1
9. Service schedule
Service performed on
Next service date
28
Summary of Contents for GHE 420
