background image

TOWING

(Fig. 2)

Undo the flap adjuster screw.

Release the pipe locking clamp and lower the pipe into the pipe locating bracket.

Tighten the flap adjuster screw.

Unhook the operating cable from the actuating arm and clip back round chassis.

Raise the rear stabiliser and lock into place.

Check lighting board operation.

Check handbrake is OFF before towing.

Check operation of jockey wheel and that it is raised before towing.

DIESEL MODEL

CAMON

IMPORTANT - 

PLEASE READ CAREFULLY

OPERATING INSTRUCTIONS

& SAFETY NOTES

C275 WOOD CHIPPER

C275D/0904

Fig. 2

No liability will be accepted for any damage caused to persons or property  

through failure to observe operating and safety instructions.

SAFETY

ALWAYS 

start the engine in the open air

DO NOT 

smoke when refuelling

ALWAYS 

stop the engine and the machine before making any 

adjustments, refuelling, moving  or cleaning or when the unit is unattended

ALWAYS

 

ensure that guards are in place when the machine is operating 

or the engine is running

DO NOT 

remove any safety guards that are fitted

ALWAYS 

wear suitable clothing and footwear to give personal protection

ALWAYS 

wear safety glasses and ear protectors

KEEP 

hands, feet and clothing out of openings, discharge and moving parts 

when the machine is operating or the engine is running

DO NOT 

touch any moving parts or attempt any maintenance whilst the 

machine is running - KEEP HANDS AND FEET AWAY

DO NOT 

allow children or anyone uninstructed to operate the machine - 

KEEP  ANIMALS  AWAY

IF A FAULT

 

develops DO NOT attempt any repair - immediately contact 

the supplier from whom the machine was obtained

Teknol House, Victoria Road, Burgess Hill, West Sussex RH15 9LH

Tel: 01444 247689   Fax: 01444 871612

Website: www.tracmaster.co.uk   E-mail: [email protected]

Reviews: