Technical Information 40.2010
Page 27
TI_40_2010_13_01_02.fm
.
Measure the resistance between black lead (
3
)
and red plug (
4
) of the diagnostic cable.
Target value: < 10 ohms
9.7.3
Checking leads between solenoid and
diagnostic jack
.
Move choke lever to
F
.
Connect M-Tronic test lead 5910 840 0903 to
the diagnostic jack, see
b
9.4
.
Disconnect the plug (
1
) from the solenoid (
2
)
.
Measure the resistance between red lead (
3
) at
the plug of the solenoid and black plug (
4
) of the
diagnostic cable.
Target value: < 10 ohms
.
Measure the resistance between black lead (
5
)
at the plug of the solenoid and red plug (
6
) of the
diagnostic cable.
Target value: < 10 ohms
9.8
Cable routing
9.8.1
Cable routing at the bushing
Leads between diagnostic jack and switch gear
.
Insert the thin black lead (
1
) between diagnostic
jack (
2
) and switch gear (
3
) in the guides
.
Insert the thin red lead (
4
) between diagnostic
jack (
2
) and switch gear (
3
) in the guides
Make certain that in area (
A
) the leads (
1
,
4
) are in
two separate guides and in area (
B
) the leads are in
the same guide – black lead (
1
) under the red
lead (
4
).
4
5903TI017 KN
3
1
5903TI013 KN
2
3
5903TI018 KN
4
6
5
5903TI019 KN
A
B
3
4
2
5903TI020 KN
1