manualshive.com logo in svg
background image

Model / Modelo: 

PT100914

 

 

Nuestro personal de Servicio al Cliente está listo para proporcionar 

ayuda. En el caso de que falte una pieza o esté dañada, enviamos la 

mayoría de las piezas de repuesto desde nuestra planta.

Si desea obtener ayuda inmediata con el ensamblaje, o información 

adicional del producto, llame a nuestro número gratuito: 1-866-902-9690.

Our Customer Service staff is ready to provide assistance. In the case 

of a damaged or missing part, most replacement parts ship from our 

facility.

For immediate help with assembly, or for additional product 

information, call our toll-free number: 1-866-902-9690.

SAVE THIS MANUAL

You will need this manual for safety instructions, operating procedures, and Warranty. Put it and the original sales 

invoice in a safe, dry place for future reference.

CONSERVE ESTE MANUAL

Necesitará este manual para informarse sobre instrucciones de seguridad, procedimientos de operación y garantía. 

Póngalo junto a la factura de compra original en un lugar seco y seguro, para futuras consultas.

10 Amp Reciprocating Saw

Operator’s manual (p.2)

Sierra Recíproca de 10 Amp 

Manual de operador (p.14)

QUESTIONS? 1-866-902-9690

Содержание PT100914


























Отзывы: