Page 6
Technical Information 40.2010
TI_40_2010_13_01_02.fm
3.2
Operating elements
1
Throttle trigger lockout
2
Throttle trigger
3
Stop switch – with the positions for
Run
and
Stop
. To switch off the engine, the stop switch
(
STOP
) must be pressed.
3.3
Stop switch function
When the stop switch is not actuated, it is in the
position
Run
: The ignition is switched on – the
engine is ready for starting and can be started. If the
stop switch is actuated, the ignition is switched off.
Once the engine comes to a standstill, the ignition is
automatically switched on again.
3.4
Choke lever
To start the engine, the choke lever (
1
) must be
pressed in at the edge (arrows) and rotated to the
position
}
. Once the engine has been started and
the throttle trigger lockout and throttle trigger have
been pressed, the choke lever automatically returns
to the position Run
F
. It is not necessary to move the
choke lever to Run
F
by hand.
After a cold start, let the engine warm up with a few
load cycles.
1
2
3
317TI005 KN
1
5903TI002 KN