Fastener
Thread
For component
Torque
Remarks
size
Nm
lbf.ft
Spline screw
IS-M6x25
Clamp/loop handle
4.5
3.3
3)
Spline screw
IS-M6x25
Support/drive tube
6.0
4.4
1) 4) 6)
Spline screw
IS-M6x35
Clamp moldings/support block
(handle support/bike handle)
4.5
3.3
3)
M8
Carrier
24.0
17.7
Spline screw
IS-M6x18
Clutch shoe/carrier
12.0
8.8
M8
Flywheel
32.0
23.6
M10
Decompression valve
14.0
10.3
1) 2) 4) 5)
M14x1.25
Spark plug
20.0
15.0
Screw plug
M11x10
Gearhead
8.5
6.3
Spline screw
IS-M5x14
Filter cover/filter housing
6.0
4.4
1) 2)
Plastoform screw
IS-P4x16
Control handle/handle moldings
1.0
0.75
Collar screw
IS-P3.5x10.6
Detent spring/slide control
(bike handle)
1.1
0.80
1) 3) 4)
Nut
M12x1.5 L
Cutting tool
25.0
18.5
Spline screw
IS-M5x16
Cutting tool deflector/gearhead
4.3
3.2
Spline screw
IS-M6x14
Spring/support plate
10.0
7.5
2) 5)
Spline screw
IS-M6x25
Housing/shaft clamp screw
4.5
3.3
2) 5)
Spline screw
IS-M6x14
Bearing housing/support frame
10.0
7.5
2) 5)
Spline screw
IS-M10x20
Support plate/ball bearing/
support frame
20.0
15.0
2) 5)
Use the following procedure to fit a DG or P screw in an existing thread:
– Place the DG or P screw in the hole and rotate it counterclockwise until it drops down slightly.
– Tighten the screw clockwise to the specified torque.
This procedure ensures that the screw engages properly in the existing thread and does not form a new thread.
1) FS 400/450
2) FR 450
3) FS 120/200
4) FS 300/350
5) FR 350
6) with washer
Note: Power screwdriver speed settings for polymer: Plastoform screws max. 600 rpm
DG screws max. 500 rpm
6
FS 120, 200, 300, 350, 400, 450, FR 350, 450
Summary of Contents for FS 350
Page 1: ......