EN - 15
PROBLEM
PROBABLE CAUSE
SOLUTION
2.
The cutting means does not
rotate even if the throttle control
lever (Fig. 7.A) and locking
lever (Fig. 7.B) are engaged.
Battery is not inserted or
is inserted incorrectly.
Make sure that the battery is
inserted correctly (par. 7.2.3).
Incorrect connection to
the battery backpack.
Check that the machine is correctly
connected to the battery backpack.
Low battery.
Check the battery status and
recharge if necessary (par. 7.2.2).
Battery backpack
selector to "OFF".
Check that the selector (Fig. 5.B)
is placed on one of the batteries
inside the battery backpack.
The throttle control lever is faulty
or the machine is damaged.
Do not use the machine. Stop the
machine immediately, disconnect it
from the battery backpack and contact
an Authorised Service Centre.
3. The cutting means overheats
during operation.
Insufficient blade lubrication.
Turn off the machine, wait until the
cutting means is stationary, disconnect
the machine from the battery backpack
and lubricate the blades (par. 7.4).
4.
The cutting means comes
into contact with a line
or electric cable.
-
DO NOT TOUCH THE BLADE AS IT
MAY BE LIVE AND BE EXTREMELY
DANGEROUS! Grasp the machine using
the insulated rear hand grip only and
position it at a safe distance from yourself.
Disconnect the current that powers
the severed line or mains cable and
disconnect the machine from the battery
backpack before freeing the blade teeth.
5.
The cutting means comes into
contact with a foreign body.
-
Stop the machine, disconnect it
from the battery backpack and:
•
inspect for damage;
•
check for and tighten any loose parts;
•
have any damaged parts replaced
or repaired with parts having
equivalent specifications.
6.
Excessive noise and/or
vibration is experienced
whilst working.
Loose or damaged parts.
Stop the machine, disconnect it
from the battery backpack and:
•
inspect for damage;
•
check for and tighten any loose parts;
•
have any damaged parts replaced
or repaired with parts having
equivalent specifications.
7.
The machine emits smoke
during operation.
Machine damaged.
Do not use the machine. Immediately
stop the machine, disconnect it from
the battery backpack and contact
an Authorised Service Centre.
8.
Battery power reserve is low.
Severe working conditions
requiring greater
current absorption.
Optimise operations (par. 7.2.1).
Battery is insufficient for
operating requirements.
Use a second battery or an
extended battery (par. 15.1).
Decrease in battery capacity.
Purchase a new battery.
Summary of Contents for EXPERT SPH 900 AE
