background image

769-11514 / 01

04/17

Operator’s Manual

TB4200 / TB4200B

Cordless Trimmer

TABLE OF CONTENTS

Service  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Safety  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Know Your Unit  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Specifications  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Starting and Stopping  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Maintenance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Cleaning and Storage  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

IMPORTANT: Read this manual thoroughly before using this product. Follow all instructions.

DO NOT RETURN THIS UNIT TO THE RETAILER. PROOF OF
PURCHASE WILL BE REQUIRED FOR WARRANTY SERVICE.

For assistance regarding the assembly, operation or maintenance of
the unit, please call 

1-800-828-5500

(in the United States) or 

1-800-

668-1238

(in Canada). Additional information can be found at

www.troybilt.com

(in the United States) or 

www.troybilt.ca

(in

Canada).
Warranty service is available through an authorized service center.
To locate a service center in your area, please visit our website or
call the number listed above. Service on this unit, both within and
after the warranty period, should only be performed by an
authorized and approved service center. When servicing, use only
identical replacement parts.

SERVICE

All information, illustrations, and specifications in this manual are based
on the latest product information available at the time of printing. We
reserve the right to make changes at any time without notice.
The product may vary slightly from the illustrations contained in this
manual.
Copyright© 2017 MTD SOUTHWEST INC, All Rights Reserved.

SAVE THESE INSTRUCTIONS

NOTE:

This operator's manual covers multiple models. Features

may vary by model. Not all features in this manual are applicable
to all models. The model depicted may differ from yours.

BC

ORIGINAL INSTRUCTIONS

Summary of Contents for CORE TB4200









































Reviews: