![background image](http://html1.mh-extra.com/html/troy-bilt/core-tb4200/core-tb4200_operators-manual_1173485005.webp)
5
OTHER SAFETY WARNINGS
•
Maintain the unit with care.
•
Do not perform maintenance procedures other than those
described in this manual. Do not attempt to repair the unit; there
are no user-serviceable parts inside. All service, other than the
maintenance procedures described in this manual, should be
performed by an authorized service dealer.
•
If the unit is not working as it should, has been dropped,
damaged, left outdoors or dropped into water, do not use the unit.
•
Never remove, modify or make inoperative any safety device
furnished with the unit.
•
Before inspecting, maintaining, cleaning, storing, transporting or
replacing any parts on the unit:
1. Stop the motor. Refer to
Starting and Stopping
.
2. Wait for all moving parts to stop.
3. Remove the battery.
4. Allow the unit to cool.
•
Secure the unit while transporting.
•
Store the unit in a dry place, secured or at a height to prevent
unauthorized use or damage. Keep the unit out of the reach of
children.
•
Never douse or squirt the unit with water or any other liquid.
Avoid getting water in the motor and electrical connections.
Keep handles dry and clean (free from debris, oil and grease).
Clean the unit after each use. Refer to
Cleaning and Storage
. Do
not use solvents or strong detergents.
•
Keep these instructions. Refer to them often and use them to
instruct other users. If you loan this unit to others, also loan
them these instructions.
SAVE THESE INSTRUCTIONS
TRIMMER SAFETY
•
Only use the trimming line described in the
Specifications
section
of this manual. Never use metal-reinforced line, wire, chain or
rope. These can break off and become dangerous projectiles.
•
Do not replace the cutting head with rigid or metal blades. Doing
so could result in serious injury.
•
The cutting head shield must always be in place while operating
the unit. Do not operate the unit without both trimming lines
extended and the proper line installed. Do not extend the
trimming line beyond the length of the shield.
•
Adjust the handle to provide the best grip, if applicable.
•
Make sure the cutting head is not in contact with anything
before starting the unit.
•
Always hold the unit with both hands when operating. Using
only one hand could lead to a loss of control and result in
serious personal injury.
•
Keep hands and feet away from the cutting area.
Summary of Contents for CORE TB4200
