4
1
Numerical keys (0..9)
The numerical keys can be used to enter a screen
number, a value or text.
You can select menu choice
10 by pressing key 0.
Entering text
Numerical keys 2..9 can be used to change the name of
a control group (left and right), a timer or a counter.
The maximum text length is 15 characters (including
spaces). The character you enter is shown in a little
box. Press the numerical key repeatedly until the
required character is shown. You can enter a
punctuation mark by repeatedly pressing numerical key
1 until the required punctuation mark is shown. You
can enter a space using the 0 key.
Press once for
a
, twice for
b
etc. You can move the cursor with the and keys.
Where relevant, e.g. for menu options etc., the text will automatically start with an initial capital.
Add/remove breakpoint or period
Press the [Enter] key (edit mode)
Press and hold the [F1] function key and then press the:
[+] key to add a breakpoint/period (provided that the maximum value for periods/breakpoints has not been
reached)
[-] key to remove a breakpoint/period (provided that there is at least one period/breakpoint)
The number of breakpoints/periods is adjusted automatically.
2
Function keys (graphic, alarm, previous / next control etc.)
Function key F1 (change language)
Changing language:
Hold down F1 and press on the left or right cursor key.
Function key F2 (change house status)
Use this function key to call up the house status.
Function key F3 (graphic)
Use this function key to place a graph on a window. The “graph” function is active when the LED in the
function key lights. You can switch off the “graph” function by pressing the function key again (the LED
in the key is off then).
The values in a graph are linked to the window on the basis of which the graph was drawn up. The graph is
updated automatically when you change the details in the window.
If the details in the window are displayed in graph form, the
symbol will be displayed in the top right corner
of the menu line.
Select previous / next control
Select previous / next control.
If controls of the same type, e.g. ventilation groups (left, right, recirculation etc.), are
available, you can use these keys to select the previous or next control.
def3éèêë
abc2äàâçæå
mno6ñôöœø
jkl5
wxyz9
tuv8û
.,1'-:+
ghi4îï
pqrs7
_0
