9
Fault
Cause
Rectification
No hot water despite the hot water
valve being fully opened.
No electricity supply.
User/qualified installer: Check the fuses in the house installation.
Poor jet formation, fitting spurts
when tap is turned on.
Jet regulator blocked with limes-
cale.
User/qualified installer: Clean the jet regulator of the fitting and replace it if
necessary (see 1.3 Care/Maintenance).
Fitting drips during heating up
process.
Heater installed without anti-drip
function.
Normal occurrence with conventional small heaters without anti-drip func-
tion. Dripping will stop when the heating up process has been completed.
Anti-drip function of the “SNU 5 SL
anti-drip comfort” defective.
Qualified installer: Replace heater
Fitting keeps dripping after being
turned off.
Due to the design type, residual
water is running out of the fitting
outlet.
3. Fault rectification
for the user and qualified installer
4. Environment and recycling
Dispose of packing material and appliances
The dispose of the packing material and the
appliances must be done according to the lo-
cal recycling laws and regulations.
For guarantees please refer to the pespective
terms and conditions of supply for your country.
The installation, electrical connection
and first operation of this appliance
should be carried out by a qualified installer.
The company does not accept liability for
failure of any goods supplied which accor-
dance with the manufacturer‘s instructions.
5. Guarantee
English
