INSTALLATION
Außerbetriebnahme
D
EU
TS
CH
www.stiebel-eltron.com
LWE 40 |
19
7. Außerbetriebnahme
7.1 Vorübergehende Außerbetriebnahme
f
f
Schalten Sie mit der Sicherung in der Hausinstallation die
Spannungsversorgung des Gerätes aus.
f
f
Schließen Sie die Innenblende, um Wärmeverluste zu
vermeiden.
7.2 Außerbetriebnahme für einen längeren
Zeitraum
f
f
Nehmen Sie die Innenblende ab.
f
f
Ziehen Sie die Lüftereinheit aus dem Wandeinbaugehäuse.
f
f
Füllen Sie das Wandeinbaugehäuse mit Dämmstoff aus. Dies
erleichtert den späteren Einbau eines neuen Gerätes.
f
f
Schließen Sie die Innenblende.
8. Störungsbehebung
Anzeige
„Störung“
blinkt x-mal
Ursache
Behebung
1
Störung des Lüfters Identifizieren Sie, bei welchem Lüfter die
Störung auftritt. Falls ein Lüfter blockiert
ist, beseitigen Sie die Ursache.
Mindestens ein Lüfter gibt über die gelbe
Litze ein falsches Alarmsignal aus. Prüfen
Sie die Spannung (gelbe Litze — GND).
Normalbetrieb : > 14,4 V
Alarm : < 1,65 V
Undefinierter Zustand : 1,65 V < x < 14,4 V
Ersetzen Sie ggf. den Lüfter.
2
Pegelfehler bei der
Systemerkennung
Prüfen Sie die Spannungsversorgung des
Lüfters.
Prüfen Sie, ob die gelbe Litze des Lüfters
korrekt angeschlossen ist.
Prüfen Sie den Alarmausgang des Lüfters.
3
Kommunikations-
störung
Prüfen Sie die Litzen zwischen Bedienein-
heit und Adapterplatine.
Prüfen Sie, ob die Adapterplatine kor-
rekt auf die Steuereinheit gesteckt ist.
Siehe Kapitel „Montage / Elektrischer
Anschluss / Bedieneinheit an die Steuer-
einheit anschließen“.
Prüfen Sie, ob ein Kontakt an der Adap-
terplatine gebrochen oder verbogen ist.
4
Defekt bei der
Systemerkennung
(Stabilitätsstörung)
Prüfen Sie die Spannungsversorgung des
Lüfters.
Prüfen Sie, ob die gelbe Litze des Lüfters
korrekt angeschlossen ist.
Prüfen Sie den Alarmausgang des Lüfters.
5
Bedieneinheit und
Steuerungsaufbau
sind inkompatibel.
Fragen Sie an der Bedieneinheit die Kom-
ponenten der Anlage ab. Prüfen Sie die
Kompatibilität der installierten System-
komponenten.
Ersetzen Sie die Bedieneinheit durch eine
geeignete Bedieneinheit.
blinkt dauer-
haft
Die Steuereinheit
ist nicht korrekt
eingelernt.
Lernen Sie die Steuereinheit neu ein. Falls
das Einlernen nicht gelingt, stellen Sie
mit einem Reset die Werkseinstellungen
wieder her.
9. Technische Daten
LWE 40
236659
Schallangaben
Schallleistungspegel L
wges
bezogen auf
Luftvolumenstrom
dB(A)
32 (bei 20 m³/h),
37 (bei 30 m³/h)
Normschallpegeldifferenz
dB
37
Einsatzgrenzen
Temperatureinsatzbereich
°C
-15 bis +40
Energetische Daten
Energieeffizienzklasse bei durchschnitt-
lichen Klimaverhältnissen für Steuerung
nach örtlichem Bedarf
A
Elektrische Daten
Leistungsaufnahme
W
2-7
Nennspannung
V
24
Ausführungen
Filterklasse
ISO Coarse > 60 % (G4) |
ISO Coarse > 30 % (G2)
Schutzart (IP)
IP41
Dimensionen
Höhe
mm
258
Breite
mm
258
Tiefe
mm
550
Maximale Aufstellhöhe
m
2000
Durchgangsöffnung min.
mm Ø200, quadratisch 185x185
Gewichte
Gewicht
kg
4,25
Werte
Luftvolumenstrom
m³/h
20/30/40/49/70
Luftvolumenstrom Gegentaktbetrieb
m³/h
10/15/20/25/35
Wärmebereitstellungsgrad bis
%
93
Wandstärke
mm
300 - 550
Wandeinbaugehäuse
LWE 40 TG-550
LWE 40 TG-800
236662
236663
Wandstärke
mm
300 - 550
550 - 800
Länge
mm
550
800
Höhe
mm
200
200
Breite
mm
202
202
Weitere Daten
Software-Version
≥ 3.0.0