INSTALLAZIONE
Installazione
www.stiebel-eltron.com
LWE 40 |
69
IT
A
LIA
NO
5.2.5 Collegamento dell'unità di programmazione all'unità di
comando
1
2
3
4
1
2
3
4
1
2
3
4
D
00000
71
09
4
1
2
1 Retro dell'unità di programmazione
2 Scheda adattatore
5.3 Montaggio dell'unità di programmazione
Nota
Prima di montare l'unità di programmazione, occorre
predisporre il cablaggio tra unità di comando e ventila-
tore, nonché tra unità di comando e sorgente di tensione.
D
00000
700
78
f
f
Far passare la scheda dell'adattatore attraverso la cornice di
copertura e quella del portellino. Le linguette piccole saran-
no rivolte verso l'interno della parete.
f
f
Posizionare la scheda dell'adattatore sull'unità di comando in
modo da non coprire le morsettiere.
Nota
Il cavo presente tra la scheda dell'adattatore e l'unità di
programmazione non può essere allungato.
f
f
Avvitare la cornice di lamiera alla scatola da incasso. Le lin-
guette devono essere rivolte verso l'alto e il basso.
f
f
Posizionare la cornice di copertura sulla cornice di lamiera.
f
f
Inserire l'unità di programmazione nell'apertura della corni-
ce di copertura. Spingere con cautela l'unità di programma-
zione, finché non si incastra nella cornice di lamiera.
5.4 Montaggio dell'unità ventilatori
D
00000
700
39
f
f
Rimuovere gli elementi di sostegno dall'alloggiamento inte-
grato nella parete.
f
f
Pulire l'alloggiamento integrato nella parete.
D
00000
700
52
f
f
Spingere l'unità ventilatori nell'alloggiamento integrato nella
parete in modo che il manico si trovi sul lato interno e in
basso.
f
f
Verificare che l'unità ventilatori non sia bloccata e non ri-
manga sospesa sull'alloggiamento integrato nella parete.
f
f
Spingere l'unità ventilatori fino a battuta nell'alloggiamento
integrato nella parete.