Operating Manual
RC-3030
5
Personnel being trained or made acquainted with the equipment may only be deployed under
constant supervision of an experienced person.
Work on the electrical parts of the equipment may only be undertaken by a skilled
electrician or by a trained person under the guidance and supervision of a skilled
electrician as well as in accordance with the electrical engineering regulations.
2.4
Safety Precautions Applicable to Different Operating Conditions
Avoid any method of working that impairs safety! All precautions have to be taken, that the machine
will only be used in a safe and functional status.
Only operate the machine when all safety devices and related safety equipment, e.g.
detachable safety devices, emergency stops, and suction devices are present and
operational!
The machine has to be checked visually at least once a day for any damage and defects. In the
event of operational malfunctions the machine must be shut down immediately and secured. The
fault must be rectified before starting the machine again!
Secure the work area around the machine in public areas providing a safety distance of
at least 10 feet around the machine.
Fault must be rectified immediately!
Start up and switch off operations and control devices have to be handled in accordance with the
Operating Instructions.
All persons in the proximity of the machine must wear safety glasses with lateral
protection as well as safety shoes. Ear protection may be required. The operator is
obliged to wear close fitting protective clothing.
Use only extension cables for extending the main cable that are sized and marked in accordance
with the overall power consumption of the machine and the valid local guidelines.. Before starting
the machine make sure that nobody can be endangered when the machines starts running.
Do not switch off or remove the exhaust and ventilation devices when the machine is
running!
2.5
Repair Work, Maintenance Activities, and Default Repair on the Job Site
Before starting any servicing work on the machine, put the machine in the Safety off
position as described in chapter 2.5 in order to prevent the machine from being switched
on accidentally.
Please follow any special safety instructions in the various chapters on servicing the machine. (See
chapter 7.)
