Operating Manual
RC-3030
15
4.4
Transportation by Vehicle
When transporting the machine with a vehicle, proceed in such a manner that damage due to
the effects of use of force or incorrect loading and unloading is avoided. Use straps to tighten the
machine to the cabin of the vehicle.
Use at least two straps, or tighten the machine with one strap to the cabin wall of the vehicle. Make
sure, that all parts of the machine are fixed.
4.5
Operation Conditions
Check the surface to be treated for loose parts (stones, screws, etc.). The surface must be swept
if necessary. Make sure that the machine can travel over all inequalities on the surface. Small
inequalities like floor joints less than ¼ inch are no barriers for the machine.
The machine must be operated in accordance with instructions given in Chapter 5—Initial operation.
