RC-3030
Operating Manual
18
6.0 Operation of the Machine
6.1 Daily Operation
6.2 Failure
6.3 Restart
6.4 Control Panel Overview (Machine Back)
6.5 Handle Control Panel Overview (Manual Control)
6.6 Simple Procedure for Engaging Manual Control
6.7 Operation of Machine Using the Handle Control Panel (Manual Control)
6.8 Control Panel Overview (Remote Control)
6.9 Simple Procedure for Engaging Remote Control
6.10 Operation of Machine Using the Remote Control
6.1
Daily Operation
Preparing for start-up and initial operation of the grinder is described in Chapter 5 "Starting Machine."
Perform grinding operation in parallel tracks in a way that the dust hose and electric cable do not
become twisted.
Make sure that no vehicles, such as forklift trucks and other equipment, run over the electric cable
and the dust hose. The speed of moving the grinding machine over the work surface will influence
the final finish and production.
In the case that the surface shows different characteristics, specifically different hardness or coating
thicknesses, a uniform grinding result will be achieved by varying the speed of movement over the
surface.
6.2 Failure
Regardless of the following information, the local safety regulations must be followed in any case of
operation of the machine. Assure all turning machine parts have come to standstill before inspection
or maintenance work starts. Always use the Safety Off as described in Chapter 2.
6.3 Restart
All persons in the proximity of the machine must wear safety glasses with lateral
protection as well as steel toes work boots and hearing protection. The operator is also
required to wear close-fitting protective clothing.
See Chapter 5—Initial Operation.
