58
07/13424999918
WPS
®
2 Window Protection System
Fault messages
With the fault message settings, you can select the fault message which is to trigger the motor line monitoring by me-
ans of an interruption.
WPS2/A
WPS2/B
Error sensor monitoring
(only for WPS2/A)
The sensor will be tested via the test output and test input before each closing operation.
If a fault is detected during this time, this will be indicated by the red fault LED as well as
$Y "; ; ]
Error Hardware
The WPS2 system will carry out self-tests on the hardware when the supply voltage is
applied as well as during operation. A fault will be indicated by the red fault LED as well
$Y "; ; ]
Error Sensitive edge
The WPS2 system will cyclically test the function of the switching strip input. If a fault is
detected, this will be indicated by the red fault LED as well as by the interruption of the
motor line monitoring if necessary.
Emergency-closed mode
[; Y" $Y¥ ¬[]
If the emergency close operation is activated, the motor line monitoring will be interrupted
if necessary.
D1
D2
D4
D3
OK
!
D1
D2
D4
D3
OK
!
D1
D2
D4
D3
OK
!
D1
D2
D4
D3
OK
!
