72
08/13424999756
Service Port Software
2.2 Maximum opening using ventilationfunction
This function is used to set up stroke limitation by run time
(in seconds). In this connection to the maximum stroke [mm]
corresponds 200 seconds, the zero Stroke [mm]
(not extended) 0 seconds. A fixed interval (eg 100 seconds)
corresponds to a new fixed shorter stroke.
This function can only be used in the OPEN
direction and in combination with an active activation time.
Note
: This function is deactivated when supplied.
2.3 Maintenance counter enable / disable
For the deactivation / activation of maintenance counter a
password is required. This password is replaced by the
users by registering at
"www.STG-Beikirch.de"
or by
e-mail at
(Subject: Registration
Service Port Software).
After entering the password, you get into the
user interface of the service counter. Here
the maintenance counter is disabled or enabled.
Through the user interface maintenance counter any time
can be chosen to signal a maintenance due.
The overdue maintenance is then displayed on the flashing
green power LED.
Functions are not interrupted.
The maintenance counter is only active when the control
panel is power supplied.
The maintenance counter stops and stores its current value,
when the control panelis switched off.
Note
: This function is deactivated when supplied.
Compact control panel 4A, 4A/M und 8A, 8A/M
